Power class d tpa3116d2. Buy TPA3116D2 Digital Amplifier Board Class D 50W*2 Power AMP Stereo Audio Sound System DC 12

Class D TPA3116D2 2.1 Channel Audio Amplifier Board 2x50W+100W

The amplifier confirmed operability parameter control was not carried out. At the same time, when listening to a real signal music , the average level is much lower than the peaks, overheating was not observed even in the dual-channel mode. If you plan to work at maximum power, then use the power supply with a maximum current of at least 8 A, because it must be designed for maximum simultaneous consumption of two channels at the same time.

Next

TPA3116D2 Audio Amplifier IC Pinout, Datasheet, Equivalent, Specifications and Dimensions

I used two cheaper 320-6546 Yuan-Jing 100W 10~32 VDC In to 12~35 VDC Out Adjustable Boost Converter Board to power four of these amps in a virtual pinball game I'm building that requires 7.

Next

Dual

Finally, we take the frequency band of the amplifier from 46 Hz to 20 kHz, as the closest to the real conditions. The ability to run on as little as 12V with reduced power output due to lower than spec'd rail voltage for full power is a benefit because I happen to have a Li-Ion battery pack that can power one of these with a set of efficient speakers to party levels.

Next

TPA3116D2 Audio Amplifier IC Pinout, Datasheet, Equivalent, Specifications and Dimensions

The holes for mounting the Board are in the corners.

Next

TPA3116D2 Audio Amplifier IC Pinout, Datasheet, Equivalent, Specifications and Dimensions

I may have the same issues and don't know it.

Next

Dual

Connect directly to GVDD for no power limit 7 GVDD Internally generated gate voltage supply. When removing the heat sink, try not to lose the plastic washers on the screws located between the radiator and the PCB. FYI, the amp's max output I measured running at 24V with the output just below clipping and driving 4 ohms was 40W RMS per channel.

Next